I have a hard time to mount an image file. It will not show up into the starwind GUI. The following is the conf file and log file. Can anyone help me?
#
# StarWind iSCSI server configuration file.
#
# This file contains list of SCSI devices that will be accessible to iSCSI.
# The device name should be placed in the first column followed by the target name.
# The device name and the target name should be separated by at least one space.
#
# $Id: starwind.conf,v 1.21 2005/01/31 01:50:03 valery Exp $
#
[parameters]
#
# LogLevel values: (0-Disabled, 1-Errors, 2-Warnings, 3-all messages)
#
LogLevel = "1"
#
# Don't change the LogMask if you have no idea what does it mean!
#
LogMask = "0x8000ffff"
#
# Port number for iSCSI connectons
#
Port = "3260"
#
# Interface to listen to. "0.0.0.0" corresponds to "listen to all interfaces".
#
Interface = "0.0.0.0"
#
# Macros:
# $(host) - host name
# $(symid) - symbolic target id ('cdrom.z' for example)
#
#
# Uncomment the line below to have global target id as part of target name
#
DefTargetName = "iqn.2003-06.com.rocketdivision.starwind:$(host).$(symid)"
#
# Username and password used for the control connection.
#
Login = "admin"
Password = "##zJiWBrWG8zkY/gVS3sNnyA=="
#
# CHAP authentification for control connections
#
#CtlAuthMode = "chap"
#CtlAuthServerName = "srv"
#CtlAuthServerSecret = "123"
#CtlAuthClientName = "user"
#CtlAuthClientSecret = "345"
#
# 'Echo = yes' - enables echo for control connections.
#
Echo = "no"
#
# Minimal 'maximum transfer length' should be supported by all SPTI devices
#
MinBufferSize = "65536"
#
# 'Minimal' aligment mask for SPTI devices - all buffers passed to SPTI will
# be aligned according to this mask at least. Sure if an adapter requests
# bigger aligment target will supply correctly aligmned buffers.
#
AlignmentMask = "0x0000"
#
# Setting 'AllowOnlyRecordableCd' to 'yes' forces the target to filter out all but
# recordable CD/DVD.
#
#AllowOnlyRecordableCd = "no"
#
# Auto Export some of the found Devices
#
#AutoExportDevices = "spti:disk,spti:cd/dvd"
#AutoExportDevices = "spti:cd/dvd"
#
# Devices are autoexported as read/write by default
# set AutoConfigMode="ro" to allow only readonly access to all the devices
#
#AutoExportMode = "ro"
#
# Length of iSCSI queue. (min 16, max 512)
#
MaxPendingRequests = "64"
[plugins]
#
# Plugins
#
# Parameters (mandatory):
# -module - plugin dll
# -symlink - device name prefix for all devices managed by the plugin
# -type - type of devices managed by the plugin
# (optional):
# -loglevel:"n" (n=0-3) - override log level for a plugin (by default global LogLevel value is used)
#
#
# Ram Disk plugin
#
addplugin -module:"RamDisk.dll" -symlink:"RamDrive" -type:"RAM disk"
# addplugin -module:"IBVolume.dll" -symlink:"IBV" -type:"IBV" -imagedir:"ibv" -imagemask:"*.x" -loglevel:"3"
#
# ImageFile-specific parameters (mandatory):
# imagedir - image files directory. The plugin scans this directory for available images.
# imagemask - image file mask. While scanning the directory (see above) the plugin will
# look only for files selected by this mask.
#
addplugin -module:"ImageFile.dll" -symlink:"ImageFile" -type:"Image file" -imagedir:"d:\images" -imagemask:"*.img"
#
# VirtualDvd-specific parameters (optional):
# share - sharing option flags. May be '', 'r', 'w' or 'rw'. 'r' means that device will be
# shared for reading. 'w' - for writing. Default is ''.
# sessions - number of simultaneous iSCSI session allowed for this device. Default is 1.
#
addplugin -module:"VirtualDvd.dll" -symlink:"VirtualDvd" -type:"Virtual DVD" -imagedir:"images" -imagemask:"*.iso"
[devices]
#
# Hard drive accessible through SPTI
#
#add \\.\Physicaldrive0
#
# SPTI-specific device parameters (optional)
# -timeout:nnn - SCSI command execution timeout (in seconds). Default is 108000 (30 hours).
# -share:"<rw|r>" - to allow multiple initiators to access the device (shared mode)
# -sessions:nnn - set maximum number of initiators allowed to mount the device in shared mode
#
#
# CD-ROM accessible through SPTI
#
#add \\.\Z:
# Share a hard drive or a CD-ROM to multiple clients
#add \\.\F: -timeout:256 -share:"rw" -sessions:8
#
# ImageFile device parameters:
# -file - image files name. This name is relative to 'imagedir'. The file should exists.
# It can be created by means of 'mksparse' utility.
# -header - if not 0 the plugin will not use given amoung of bytes in the beginning of the file,
# This value should be sector aligned.
# -asyncmode:<no|yes> - if 'yes' the image is opened in asyncronous mode (you can benefit from this on stripped volumes)
#
#add "ImageFile0" -file:"image.img" -asyncmode:"yes"
#add ImageFile1 -file:"\\.\X:" -header:65536
add ImageFile0 -file:"d:\image.img"
#
# RAM disk device parameters:
# -size - size of RAM disk to create (in MB).
# -format - if 'yes' created disk will be formatted as FAT16 partition.
# -useawe:<no|yes> - allows creating of huge ram drives (>1GB)
# But the AWE mode is a bit slower than not using AWE!
# -speedtest:<no|yes> - can be used for network throughput tests.
# In the mode no data actually are written to or read from the ram disk.
#
#add RamDrive0 -size:16 -format:yes
#add RamDrive0 -size:16 -format:no -useawe:no -speedtest:yes
#add "RamDrive0" -size:"16" -format:"yes"
#
# Virtual DVD device parameters:
# -file - image (iso or mds) file name.
# -type - 'iso' or 'mds' depending on type of the image.
#
#add VirtualDvd0 -file:"D:\temp\iwin2k.iso" -type:"iso"
# add "IBV0" -file:"test.ibv"
[permissions]
#
# CHAP authentication
#
#allow -device:RamDrive0 -chapLocalName:"iqn.1991-05.com.microsoft:home.MSHOME.NET" -chapLocalSecret:"5432109876543210" -chapPeerSecret:"0123456789012345"
#allow -chapLocalName:"test" -chapLocalSecret:"5432109876543210" -chapPeerName:"" -chapPeerSecret:"0123456789012345"
08:38:14:718 (d48) Srv: StarWind iSCSI Target Version 2.4.3 (Build 0x20050209, Win32)
08:38:14:718 (d48) Srv: *** FREE NON COMMERCIAL version ***
08:38:14:718 (d48) Srv: Please contact Rocket Division Software at <info@rocketdivision.com> for more details.
08:38:14:718 (d48) Srv: Maximum number of clients allowed: 2.
08:38:14:718 (d48) Srv: Config file: 'C:\Program Files\Rocket Division Software\StarWind\starwind.conf'
08:38:14:718 (d48) conf: 'LogLevel' = '1'
08:38:14:718 (d48) conf: 'LogMask' = '0x8000ffff'
08:38:14:718 (d48) conf: 'Port' = '3260'
08:38:14:718 (d48) conf: 'Interface' = '0.0.0.0'
08:38:14:718 (d48) conf: 'DefTargetName' = 'iqn.2003-06.com.rocketdivision.starwind:$(host).$(symid)'
08:38:14:718 (d48) conf: 'Login' = 'admin'
08:38:14:718 (d48) conf: 'Password' = '##zJiWBrWG8zkY/gVS3sNnyA=='
08:38:14:718 (d48) conf: 'Echo' = 'no'
08:38:14:718 (d48) conf: 'MinBufferSize' = '65536'
08:38:14:718 (d48) conf: 'AlignmentMask' = '0x0000'
08:38:14:718 (d48) conf: 'MaxPendingRequests' = '64'
08:38:14:734 (d48) conf: Variable 'LogLevel' is set to '1'.
08:38:14:734 (d48) conf: Variable 'LogMask' is set to '0x8000ffff'.
08:38:14:734 (d48) conf: Variable 'Port' is set to '3260'.
08:38:14:734 (d48) conf: Variable 'Interface' is set to '0.0.0.0'.
08:38:14:734 (d48) conf: Variable 'DefTargetName' is set to 'iqn.2003-06.com.rocketdivision.starwind:$(host).$(symid)'.
08:38:14:734 (d48) conf: Variable 'Login' is set to 'admin'.
08:38:14:734 (d48) conf: Variable 'Password' is set to '##zJiWBrWG8zkY/gVS3sNnyA=='.
08:38:14:734 (d48) conf: Variable 'Echo' is set to 'no'.
08:38:14:734 (d48) conf: Variable 'MinBufferSize' is set to '65536'.
08:38:14:734 (d48) conf: Variable 'AlignmentMask' is set to '0x0000'.
08:38:14:734 (d48) conf: Variable 'MaxPendingRequests' is set to '64'.
08:38:14:734 (d48) conf: 'RamDisk.dll' loaded successfully.
08:38:15:078 (d48) conf: 'ImageFile.dll' loaded successfully.
08:38:15:093 (d48) conf: 'VirtualDvd.dll' loaded successfully.
08:38:15:093 (d48) SCSI: Failed to create 'ImageFile0' device.
08:38:15:093 (d48) S: *ERROR* cannot open the device 'ImageFile0'.
08:38:15:093 (d48) Srv: * Device test failed for 'ImageFile0'.
08:38:15:093 (d48) conf: Device test failed for 'ImageFile0'.
08:38:15:093 (d48) Srv: Refreshing device list (complete)...
08:38:16:734 (d48) Srv: A new SPTI device '\\.\E:' found.
08:38:16:765 (d48) Srv: A new SPTI device '\\.\PhysicalDrive0' found.
08:38:16:765 (d48) Srv: A new SPTI device '\\.\PhysicalDrive1' found.
08:38:16:765 (d48) SCSI: Failed to create 'ImageFile2' device.
08:38:16:765 (d48) Plugin: Test for device 'ImageFile2' failed.
08:38:16:765 (d48) SCSI: Failed to create 'ImageFile1' device.
08:38:16:765 (d48) Plugin: Test for device 'ImageFile1' failed.
08:38:16:765 (d48) Srv: (FREE) Binding to 0.0.0.0:3260 ...
08:38:16:765 (d48) Srv: Waiting for a connection at port 0.0.0.0:3260 ...
08:38:16:781 (f58) conf: Waiting for a control connection at port 3261 ...
08:38:33:015 (f58) conf: Accepted the control connection from 127.0.0.1:1327.
The Latest Gartner® Magic Quadrant™Hyperconverged Infrastructure Software