[ ... ] Is it normal situation? In the MS iSCSI initiator on both sides you have to connect both "test" and "testpartner". Regarding the sync issue, you should check that the firewalls are disabled on both servers or that you have exceptions for ports 3260. Check that in StarWin...

What IP addresses are you using to connect your HA device in the MS iSCSI initiator in both sides? Look, i have two servers with Starwind targets. On the same servers i run ISCSI initiator and connect them. Addresses of HA servers appear automatically on the Discovery Tab. One address - Synchroniza...

NoName wrote:Ok. I understand. But now i try to configure only HA cluster, without Failover cluster. So a problem not in it.

What IP addresses are you using to connect your HA device in the MS iSCSI initiator in both sides?

camealy wrote:Great, thanks. Anyway we could get an actual Event ID number for the warnings/failures?

Sorry, but not for now, may be in next versions.

I installed and don't see anything new related to synchronization throttling. What I thought was on the roadmap, was something that would allow you to turn down the synchronization traffic priority and usage so your primary target was usable during a full sync. Right now yes, you can talk to the so...

Thank you for the information and please keep us updated about further tests results.

For sure, it would be great if you make the post!
Thanks!

We were looking to get Starwind status monitored in our MSP software and it looks like with 5.6 we will b able to! Could I get a list of the Event Source and Event ID's for everything that Starwind would log as a Warning or Failure? Thanks! Kurt Here is a list of events that can be generated by Sta...

Any chance 5.6 has the sync priority? :D Already on the schedule. OK, great. One small feature request would be the ability to set throttle percentages or priority on the full-sync. In heavy testing with bonded 1GB links, I notice that read/write performance isn't even enough to keep a virtual mach...

I found a workaround. I just created a 'dummy' virtual disk in the fourth position. Node1 recognizes it fine, but node2 still doesn't. I have attached the logs from node2. Are you using StarPort as initiator on all of your nodes? What are you using to create your virtual disks, StarWind iSCSI SAN o...

You can use VPN, PPTP or IPIP. The both servers should be on the same subnet to be able to see each other. We do have a manual with step by step description for how to setup a remote replication configuration but it is not available on our website, send me a message with your email and I will send y...

Hi Cristian, The StarWind free version is no longer provided, that's right. For now, only trial version is available, it includes all enterprise features. Trial periode is of 30 days, after what it doesn't turn into free version (since we haven't a free version). After trial time is expired all feat...