Based on your logs it seems you are using Deduplication device which is currently provided as experimental, could you please confirm? I would suggest you to try the same but on Basic image device and see if the problem persist. Hi, Since last week I believe I successfully configured Starwind 5.6.169...

Hi Hakan, I see we have a pre-sale case opened for you, thus you are elligible for direct support from StarWind. I forwarded your question to pre-sale support team so please expect a response shortly by email. Hello, I have 2 servers with the same configuration; 2 x E5620 CPU, 32GB Ram, 3 x Gb NICs,...

Hello, It seems that by mistake you got a license not including chap and acl. We will send you a new license by email. Hello, i have tried chad. When i select a target, go to chap permissions and try to add something, i get the error "The feature is not allowed by the license" Is this not ...

Made a few changes to the files and wandered off and then came back later and voila, a snapshot. Does it only create a snapshot if a write has been carried out? Exactly, no changes no new snapshot. Also, how do you edit the snapshot period and number of sessions to keep later? Can't see where to ed...

Another slightly related question. On a physical server, we'd normally have one big RAID array which we'd then partition are a relatively small C: drive (e.g. 50GB) for the operating system and a much larger E: drive for the data drive (e don't tend to create two RAID arrays for C: and E:) Would yo...

What is iSCSI off-load (as supported by Broadcom NIC options in PowerEdge R515), is it supported by StarWind and does it need a compatible card at the other end to offer any performance benefits? Thanks, Rob. Please follow this link to read more about iSCSI off-load: http://www.dell.com/downloads/g...

robnicholson wrote:Thanks for this. We'll have three primary targets (couple of other rarely used/very low bandwidth) so sounds like 16GB will be fine.

Regards, Rob.

Yes, it will be more than you need. For the primary targets you can allocate 2GB/target, for other targets 512MB will be enough.

Are there any sizing guidelines for CPU & memory in the host? The sizing guide only talks about disks: http://www.starwindsoftware.com/san-sizing-guide After a chat with sales, I suspect that almost any current Dell PowerEdge with dual multi-core (six core is our plan) CPUs would have plenty of...

Hi, I am having an issue where I cannot remove a target. In the help I see a force removal of target, but I do not see this as an option in the target menu. If I just choose remove target, I get the message to confirm, and I do, and nothing happens. thanks for any assistance brucifer Hi, Check that...

Hi, I am trying to replicate my production to virtual on vm, added the tape driver, now i need to know what media type to i need to set the virtual tape library to. I am using Veritas Backup Exec 10d (old); Also how cam i add multiple tapes tot he library with a Backup strategy of Daily Differentia...

Zipped log file has been sent to support@starwindsoftware.com. Please let me know your findings as I am anxious to resolve this. Thank you. We reviewed your logs. The problem is that the client is sending data packets of size 512kB. StarPort, which is being used to send data to remote mirror, has m...

This is from the config file. Am I correct in assuming that the login name is configured as "root"? <authentication> <!--Username and password used for the control connection.--> <Login value="root"/> <Password value="##evVRsIJtRmAEEd2sCslZDg=="/> <!--CHAP authentifica...

My servers can access the targets fine; but I cannot access the console. I looked at the config file; and the username is the default. Default password should be the same; but it is not working. I tried other usernames and passwords to no avail. Log file shows: The procedure of password recovery ca...

Hi all, currently I found that only two HA nodes can be deployed (Master & Slave). Can I add in future another (third) node to became secondary Slave? I would like to have 5 - 10 1U Cluster W2008R2 machines and 3 storages with MPIO to have better redundancy and performance. Hi Petr, Actually, S...

I'd be very grateful if you could pass me the heartbeat documentation update. On the other points, if that's the case i'll await 5.7 before trying to implement HA. Thanks, jim OK, you will receive the document on the email address you're using on forum. Personally I thing you can start implementing...