Free Webinar
March 7 | 11am PT / 2pm ET
Do you dream of the fastest data transfer rate?
See how to ensure max RDMA network performance!
Speaker: Vladyslav Savchenko, Pre-Sales Engineer, StarWind
Posted by Vladan Seget on March 7, 2019
The easiest way to upgrade your VMware vSphere Infrastructure in 3 Steps

Upgrading VMware vSphere infrastructure may seem a boring, tedious, and sometimes even difficult process. But that’s not true at all if you know about three steps you need to follow in order to avoid difficulties in updating. These steps are called pre-upgrade, upgrade, post -pgrade phases. What should be done at the pre-upgrade stage? How to choose the most appropriate upgrade scenario for your infrastructure and architecture? What steps should be taken after completing the infrastructure upgrade?

Learn More

Posted by Alex Samoylenko on December 18, 2018
VMware vSphere 6.7 Network I/O Control – getting under the hood

If you are a VMware vSphere administrator who wants to solve the problem of a low network throughput, Network I/O Control (NIOC) is exactly what you need! It’s a traffic-specific vSphere Distributed Switch (vDS) mechanism of network bandwidth regulation that was firstly introduced in vSphere 4.1 in 2010. NIOC appeared when 10G networking was increasingly prevalent and became a real breakthrough. With this mechanism, you can ensure high network throughput and go with fewer network adapters in ESXi hosts. That sounds pretty good, doesn’t it?

Learn More

Posted by Florent Appointaire on September 6, 2018
[Azure] Use Azure Site Recovery to migrate to Azure from your VMWare environment

You’re on VMWare ESX 5.5, 6 or 6.5 and you want to migrate to Azure? Don’t worry, it’s pretty simple now, just follow this article. To start, you must run one of the following VMWare version, supported by Microsoft, 5.5, 6.0 or 6.5. After that, you need an Azure subscription to be able to migrate to Azure.

Learn More

Posted by Alex Samoylenko on August 28, 2018
Persistent memory in VMware vSphere 6.7: what is it & how fast is it?

Persistent Memory (PMEM) support is introduced in the recently released VMware vSphere 6.7. This new non-volatile memory type covers the gap in performance between the random-access memory (RAM) and Flash/SSD. But, is PMEM really that fast? In this article, I take a closer look at what persistent memory is and its performance.

Learn More

Posted by Vladan Seget on July 10, 2018
VMware ESXi – How to roll back to previous release after upgrade

VMware ESXi has an option which allows us to revert back to previous version after upgrade. You might need it in case you don’t see your network card (driver not on the ISO) or you see the NIC perfectly, but network isn’t stable after your upgrade.

Learn More

Posted by Andrea Mauro on May 8, 2018
Why upgrade to VMware vSphere 6.7 (or why not)

Now that VMware vSphere 6.7 has been announced and it’s also available in General Availability (GA), some people may ask if it makes sense upgrade to this version (or when will make sense upgrade to 6.7). Is a GA release ready for a production environment? Or is it mature and stable enough?

Learn More

Posted by Alex Samoylenko on April 19, 2018
What should you do if “No space left on device” error occurs while updating VMware ESXi?

While updating VMware ESXi servers, VMware vSphere users may encounter the “No space left on device” error that pops up while executing “esxcli software vib update” command. Interestingly, the problem occurs even though disks are doing well and have enough free space and df -h command proves that.

Learn More

Posted by Romain Serre on February 27, 2017
Connect Veeam to vCenter and add a Backup repository

In the previous topic, we have seen how to install and update Veeam Backup & Replication 9.5. In this topic, we will prepare the environment. We will connect to vCenter to be able to backup virtual machines and we will add a backup repository. In my lab environment, I have deployed a vCenter Server Appliance 6.5 (VCSA). The VCSA FQDN is admin.vsphere.lab.

Learn More