Hello,
I have problems with starwind. I want to create a remote replication and backup!
Can you explain me how to install this please ?
Request a Quote
Feel free to contact us:
USA and LATAM:
1-617-449-7717
EMEA and APAC:
+44(0)2071936727
+44(0)2071936350
+33(0)977197857 (French)
+49-1715109103 (Germany)
Voice Mail:
1-866-790-2646
Email:
sales@starwindsoftware.com
Feel free to contact us:
USA and LATAM:
1-617-449-7717
EMEA and APAC:
+44(0)2071936727
+44(0)2071936350
+33(0)977197857 (French)
+49-1715109103 (Germany)
Voice Mail:
1-866-790-2646
Email:
sales@starwindsoftware.com
[Resolved] Problems replicate and mirroring
Moderators: anton (staff), Max (staff), Constantin (staff)
8 posts • Page 1 of 1
[Resolved] Problems replicate and mirroring
by gabriel l » Tue Feb 08, 2011 1:35 pm
Last edited by gabriel l on Wed Feb 09, 2011 3:05 pm, edited 1 time in total.
- gabriel l
- Posts: 7
- Joined: Tue Feb 08, 2011 1:28 pm
Re: Problems replicate and mirroring
by Max (staff) » Tue Feb 08, 2011 2:48 pm
Of course,
1. Ensure that your link is at least 100mbps
2. Create an image file target on the DR server
3. Create a mirror target on the primary site specifying your DR server's IP and target name during the device creation process
4. Connect the mirror target (only, image file should not be connected)
1. Ensure that your link is at least 100mbps
2. Create an image file target on the DR server
3. Create a mirror target on the primary site specifying your DR server's IP and target name during the device creation process
4. Connect the mirror target (only, image file should not be connected)
Max Kolomyeytsev
StarWind Software
StarWind Software
-
Max (staff) - Posts: 319
- Joined: Tue Apr 20, 2010 9:03 am
Re: Problems replicate and mirroring
by gabriel l » Tue Feb 08, 2011 3:47 pm
Yes, Thank you for your help.
But i did every that you says.
1. i created a image file in the DR
2. I went to the local starwind and selected add a target, hard drive, advanced Virtual, Mirror device, create new ...
3. i created new local image file then i selected Remote iSCSI Target by adding the address, port and target Name with the cache mode.
But after select a initialization methode, when i want to press the next, that do anything, you can press several times the button! But, curiously, that success when i create the second mirror in local! I read in the doc that StarPort drivers needs to be installed before connect a remote iSCSI but i'm not sure? I don't know why that don't run.
But i did every that you says.
1. i created a image file in the DR
2. I went to the local starwind and selected add a target, hard drive, advanced Virtual, Mirror device, create new ...
3. i created new local image file then i selected Remote iSCSI Target by adding the address, port and target Name with the cache mode.
But after select a initialization methode, when i want to press the next, that do anything, you can press several times the button! But, curiously, that success when i create the second mirror in local! I read in the doc that StarPort drivers needs to be installed before connect a remote iSCSI but i'm not sure? I don't know why that don't run.
- gabriel l
- Posts: 7
- Joined: Tue Feb 08, 2011 1:28 pm
Re: Problems replicate and mirroring
by Max (staff) » Tue Feb 08, 2011 4:36 pm
I haven't managed to reproduce this on VMs (using the actual build)
I have escalated this to the Q&A department, they will leave their feedback here as soon as they finish the tests.
I have escalated this to the Q&A department, they will leave their feedback here as soon as they finish the tests.
Max Kolomyeytsev
StarWind Software
StarWind Software
-
Max (staff) - Posts: 319
- Joined: Tue Apr 20, 2010 9:03 am
Re: Problems replicate and mirroring
by gabriel l » Wed Feb 09, 2011 9:41 am
Thanks for your help.
I will try to run the remote iscsi target by starport driver.
Give me news
I will try to run the remote iscsi target by starport driver.
Give me news
- gabriel l
- Posts: 7
- Joined: Tue Feb 08, 2011 1:28 pm
Re: Problems replicate and mirroring
by anton (staff) » Wed Feb 09, 2011 9:48 am
Please clarify what you mean here 
Thanks!
Thanks!gabriel l wrote:Thanks for your help.
I will try to run the remote iscsi target by starport driver.
Give me news
Regards,
Anton Kolomyeytsev
Chief Technology Officer, StarWind Software
Anton Kolomyeytsev
Chief Technology Officer, StarWind Software
-
anton (staff) - Site Admin
- Posts: 2153
- Joined: Fri Jun 18, 2004 12:03 am
- Location: British Virgin Islands
Re: Problems replicate and mirroring
by gabriel l » Wed Feb 09, 2011 3:04 pm
It success!
After update my starwind version by starwind 5.5.
I create mirror device with a remot iscsi target.
Be careful about the extension of file during the device creation process.
(Exemple : .mir for the virtual disk )
After update my starwind version by starwind 5.5.
I create mirror device with a remot iscsi target.
Be careful about the extension of file during the device creation process.
(Exemple : .mir for the virtual disk )
- gabriel l
- Posts: 7
- Joined: Tue Feb 08, 2011 1:28 pm
Re: Problems replicate and mirroring
by anton (staff) » Thu Feb 10, 2011 7:16 am
Good! Thank you very much for keeping us updated.
gabriel l wrote:It success!
After update my starwind version by starwind 5.5.
I create mirror device with a remot iscsi target.
Be careful about the extension of file during the device creation process.
(Exemple : .mir for the virtual disk )
Regards,
Anton Kolomyeytsev
Chief Technology Officer, StarWind Software
Anton Kolomyeytsev
Chief Technology Officer, StarWind Software
-
anton (staff) - Site Admin
- Posts: 2153
- Joined: Fri Jun 18, 2004 12:03 am
- Location: British Virgin Islands
8 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests